· Compliant with DisplayPort Alternate Mode on USB Type C standard
· Compliant with DisplayPort Specification version 1.3 and Embedded DisplayPort (eDP) Specification version 1.4
· Support two link lane at 1.62Gbps,2.7Gbps (HBR) or 5.4Gbps (HBR2) link rate
· Automotive DP input signal detection
· DP_BR signaling modes supported
· Support Analog RGB output for VGA with Triple 9-bit DAC up to 240MHz pixel rate. Sync signals can be provided in separated or composite manner. Support VESA and CEA timing standards up to 2048x1536@60Hz with reduced blanking
· VGA output is compliant with VESA VSIS v1r2 specification
· DAC connection detection supported
· USB Power Delivery control module supported with HPD to PD converter integrated
· DisplayPort receiver auto equalization supported for the compensation of input signal attenuation
· Active DDC buffer and related control register integrated
· IIC-over-AUX transaction supported
· Single 3.3V power supply with regulator integrated
· Embedded MCU to handle the control logic
· USB billboard module integrated
· USB 2.0 PHY supported with internal switch for data/file transport
· Support device boot up by loading firmware from On Chip Flash automatically, integrated EDID Buffer
· MCCS bypass supported
· DP AUX channel and IIC slave interface are available for firmware update and debug
· Support Auto Power Saving mode and low stand-by current
· Anti-back drive support
· Low power architecture
· RoHS compliant and Halogen free package
· Offered in 48-Pin QFN package (6 x 6 mm)